Cans sealing machine routine maintenance considerations

        Cans sealing machine is suitable for beer and beverage industry in the sparkling beverage cans filling and sealing, it is in the digestion and absorption of foreign advanced beer cans filling, sealing machine on the basis of independent development of the steam-containing cans filling, sealing unit. Filling and sealing of the overall design, cans seamer filling system Powered by a sealing system to ensure that both the absolute synchronization and coordination. Using the most advanced mechanical, electrical, pneumatic control technology, the use of the principle of equal pressure Guanguan loading, filling fast, but less stable level after filling material loss, sealing quality, smooth running machine, nice shape easy operation and maintenance, production speed frequency control characteristics.

        Cans sealing machine routine maintenance precautions:

        First, cans sealing machine to adjust the distance the disc tray and the pressure tank between the head: Loosen the lower end plate preparation tank cap holder guide shaft (screw) on a rotating disc tray tank to ram into contact with the cover anchored again the rotating disc tray tank up 2 --- 3mm, will prepare the cap tightened.

        Second, adjust the distance between the head and the sealing round: First adjust the distance around the head with the first seal between the wheels to wheel and sealing ram distance 0.5mm as a reference, the pressure head and the sealing wheel does not rub each other from as small as possible; adjust the vertical distance between the head and the first round seal between the lower end of the ram seal wheel end with a minimum gap without contact prevail. Next, in the same way to adjust the distance the head and the second track seal between the wheels.

        Third, the gap between the indenter and cans sealing machine sealing wheel: adjusted according to the hardness of the cover. Lid adjustable recent. Aluminum cap adjustable afield, after adjustment, the fixing screw locking, try ------- three front cover, check the standard later, it can work continuously.

        Fourth, each replacement canister type, according to the size required to cover the replacement of the head and the supporting cage plate.

        Fifth, mechanical maintenance: essential phase motor, gear-parts lithium-based lubricant once a month, run the motor spindle and the disc tray does not lift the tank, adjust or replace the belt.